# Crossbow Bolt Drop Chart

> Crossbow bolt drop chart for common speeds from 300 to 450 fps. See drop at 20 to 60 yards and plan your scope reticle or holdover settings.

Canonical page: https://archeryprotools.com/calculators/crossbow-bolt-drop-chart (the interactive calculator runs on that page)

Complete drop chart for crossbow bolts by speed and distance. Values are gravity-first estimates from a 20-yard zero — verify with real crossbow scope reticle data before hunting.

## 📊 Bolt Drop Chart by Speed

Drop in inches from a 20-yard zero. Crossbow hunting setups commonly produce 350–450 fps bolt speeds.

| Distance | 300 fps | 350 fps | 400 fps | 450 fps |
| --- | --- | --- | --- | --- |
| 20 yd (zero) | 0.0" | 0.0" | 0.0" | 0.0" |
| 30 yd | 5.0" | 3.3" | 2.3" | 1.5" |
| 40 yd | 14.4" | 9.9" | 7.0" | 5.0" |
| 50 yd | 28.4" | 19.9" | 14.3" | 10.5" |
| 60 yd | 47.2" | 33.4" | 24.4" | 18.2" |
| 70 yd | 71.1" | 50.5" | 37.2" | 28.1" |
| 80 yd | 100.1" | 71.6" | 53.0" | 40.3" |
| 100 yd | 174.9" | 125.9" | 94.0" | 72.2" |

**Real-world note:** Actual drop is 10–20% greater at long distances due to aerodynamic drag. Use these values as a starting point, then confirm with your scope's ballistic reticle or by shooting at distance.

## 🎯 Crossbow Drop Compensation Strategy

### Using a crossbow scope reticle

Most crossbow scopes have 3–5 aiming marks calibrated for specific distances (typically 20, 30, 40, 50 yards). Verify each mark with your bolt weight and speed — reticles are often calibrated for a specific bolt weight that may not match yours.

### Dialing with a target turret scope

For long-range crossbow work, use a scope with MOA or MIL dials. Convert drop to MOA using our trajectory calculator, then dial the exact correction for each distance.

### Holdover estimation

At 40 yards, a 400 fps bolt drops about 7.0" — roughly the width of an open hand held at arm's length. Practice holdover at the range until you can estimate reliably.

## ⚙️ What Affects Crossbow Bolt Drop

- **Bolt speed** — faster bolts drop less. A 450 fps bolt drops half as much as a 300 fps bolt.
- **Bolt weight** — heavier bolts are slower, so they drop more at distance.
- **Bolt BC (ballistic coefficient)** — smaller-diameter bolts with lower-profile vanes have less drag, so real drop matches these numbers more closely.
- **Crosswind** — a strong crosswind pushes bolts sideways much more than vertically. At 60 yards, a 10 mph crosswind can push a bolt 8–12 inches off-line.
- **Scope mounting height** — a scope mounted 3" above the rail vs 2" changes drop values slightly.

## ❓ Frequently Asked Questions

**How much does a crossbow bolt drop at 50 yards?**

A 400 fps bolt drops about 14 inches at 50 yards from a 20-yard zero. At 450 fps it drops about 11 inches; at 350 fps about 20 inches. These figures include typical drag and a 2.5-inch scope height.

**What is the maximum ethical range for crossbow hunting?**

Most crossbow hunters limit shots to 40–50 yards. Beyond that, drop increases rapidly and bolt energy drops. Verify your KE at the target distance using our [crossbow ballistic calculator](https://archeryprotools.com/calculators/crossbow-ballistic-calculator).

**How accurate is this drop chart?**

Values are gravity-first estimates. Actual drop varies with bolt BC, fletching drag, wind, and scope mounting height. Use them as a starting point, then confirm with real shooting at distance.

**Do heavier crossbow bolts drop more?**

Yes, but only slightly. A 500 grain bolt at 360 fps drops about 9.2" at 40 yards; a 400 grain bolt at 400 fps drops about 7.0". The difference is minor compared to the speed difference.

**Can I use this chart for compound bow arrow drop?**

Yes — the drop model is the same. For bow-specific trajectory analysis, use our [arrow trajectory calculator](https://archeryprotools.com/calculators/arrow-trajectory-calculator).

**Why does my crossbow shoot lower than the chart?**

Possible reasons: (1) your real bolt speed is slower than assumed, (2) your scope is mounted higher than 2.5", (3) wind or crosswind, or (4) your zero is not exactly at 20 yards. Chronograph your bolt and re-verify zero before hunting.

## 🧮 Related Calculators